Spanish
French
English
V/64
Plastic paint for interior – exterior
V/64 is a paint based on acrylic copolymer emulsions, titanium dioxide, extenders, selected fillers and chosen additives to obtain a product with good covering power, resistant to exteriors due to its great hardness and waterproofing power, very white and performance.
| Colour | White |
| Finish | Matt |
| Specific weight | 1,71 gr./cc. +/- 0.05 |
| Viscosity at time of packaging | 115K.U. at 25º C +/- 5 |
| Fixed matter % | 71 % +/- 2 |
| Volume solids % | 42 % +/- 2 |
| Performance | 5 – 6 m2/kg per coat depending of the state of the surface |
| Wet film recommended thickness | 100-110 micras per coat |
| Dry film recommended thickness | 40-45 micras per coat |
| Dry-to-touch time | 40 – 60 minutes |
| Curing time | 21 days |
| Recoat | 6 – 8 hours minimum. Maximum without limit |
| Thin with | Clean water |
| Presentation | 1, 5, 10 and 23 kg cans |
| Conservation | Keep away from extreme temperatures |
| VOC’s | Cat A/a (legal limit 30 g/l). Maximum content 25 g/l |
It can be applied on any building material, plaster, cement, etc. It can be applied by brush, roller or spray. Before application, the surface must be completely clean and dry.
First coat should be thinned with 15-20% of clean water, and the second with 8-10%.
Do not apply when air and surface temperatures are below 5° C or above 35º C and always 2-3°C above the dew temperature.
First coat should be thinned with 15-20% of clean water, and the second with 8-10%.
Do not apply when air and surface temperatures are below 5° C or above 35º C and always 2-3°C above the dew temperature.
