Peñapik

Dripping plastic paint for indoor

Dripping plastic paint PEÑA PIK has a great white and can also be applied with a foam roller. Projected to gun gets a very round drop, without wastage, or cracks, as well as foam roller pore 3 gets a cut of varying sizes. It has been conceived for all kinds of surfaces (plaster, cement, etc.) inside, allowing finished in relief of all kinds.

Colour White
Finish Matt
Specific weight

 

 

1,85 gr./cc.
   
Volume solids

 

 

76%
Coverage 1,5 to 2 m2/Kg. (depending on work)
Drying time

 

 

6 to 12 hours.
Hardness Very good.
Thinner Water, so it is considered fireproof.
Pack sizes

 

 

5 and 25 Kg.
Conservation Keep protected from extreme temperatures.

On porous surfaces such as plaster, it is necessary a hand of preparation, which can be the same PEÑA PIK product diluted with water, applying it with a roller or brush and then projected to pistol to get the type of gotelé desired. If you want to get a cut, scratching or other type of relief, the product must not be diluted.

It can applied by brush, roller, spray gun, airless, etc. Walls to be painted must be clean and dry.

Do not apply at temperatures below 5 ° C or higher than 35 ° C.