2. Painting and decoration products
  3. Walls and ceilings

P-17

Matte Plastic Paint for Interior and Exterior

Interior-exterior matt plastic paint formulated with acrylic copolymer emulsions with a good balance between opacity, flexibility and finish in both white and colours. It is permeable to interior vapors and impermeable to exteriors.
Suitable for decoration and protection of masonry surfaces in general, both interior and exterior with little problem.
Color White
Finish Mate
Specific weight 1.57 +/- 0.05 gr./cc.
Viscosity when packaging 110 KU at 25ºC
fixed matter 60% +/- 2
Solids by volume % 39% +/- 2
Performance 10 to 12 m 2 /lt. by hand according to the state of the facing.
Recommended wet thickness 80-100 microns per layer
Touch dry time 40 to 60 minutes.
Full cure 21 days
repainted From 4 to 6 hours minimum, maximum without limit.
diluent Sweet water
Presentation Containers of 14 lt.
Conservation Keep away from extreme temperatures.
VOCs Cat A/a (legal limit 30 g/l) max content 25 g/l

It can be applied on any construction material, plaster, cement, plaster, etc. Its application can be by brush, roller, projected by spray gun or airless, etc. Before its application, the facing must be completely clean and dry. It should not be applied at temperatures below 5ºC or above 35ºC.