Spanish
French
English
Anti-condensation Insulating Paint
Anti-condensation Insulating Paint
Matt plastic paint, avoids the cold wall effect.
Anti-condensation paint specially designed to reduce the phenomenon of the cold wall effect, which is usually the cause of the appearance of blackened areas due to the proliferation of mold.
Moisture by condensation occurs when there is water vapor inside a home and it comes into contact with cold walls (a more pronounced phenomenon in winter).
In addition, it provides good thermal insulation capacity , as it is formulated with hollow glass microspheres of low thermal conductivity.
Especially indicated for decoration on ceilings and vertical walls indoors and outdoors (plaster, cement, plaster, etc.), where there are condensation problems or where you want to achieve a certainthermal isolation.
Non-toxic, with very low odor and non-flammable.
Moisture by condensation occurs when there is water vapor inside a home and it comes into contact with cold walls (a more pronounced phenomenon in winter).
In addition, it provides good thermal insulation capacity , as it is formulated with hollow glass microspheres of low thermal conductivity.
Especially indicated for decoration on ceilings and vertical walls indoors and outdoors (plaster, cement, plaster, etc.), where there are condensation problems or where you want to achieve a certainthermal isolation.
Non-toxic, with very low odor and non-flammable.
| Color | White |
| Finish | slightly textured matte |
| Specific weight | 0.86 +/- 0.05 gr./cc. |
| Viscosity when packaging | 130 KU at 25ºC |
| Fixed matter % | 52% +/- 3 |
| solids in theoretical volume | 60% +/- 3 |
| Performance | 1 to 2 m 2 /kg and hand, depending on the facing |
| Touch dry time | 40 to 60 minutes |
| full cure | 21 days |
| repainted | from 4 to 6 hours minimum, maximum without limit |
| diluent | Sweet water |
| Presentation | Containers of 750 ml and 4 lt. |
| Conservation | Keep away from extreme temperatures |
| VOC's | Cat A/a (legal limit 30 g/l). Maximum content 25 g/l |
It can be applied on any construction material, plaster, cement, plaster, etc. Its application can be by brush or short-haired roller or even a spatula or steel trowel. It can be repainted with any plastic paint.
Before its application, the facing must be completely clean and dry. It should not be applied at temperatures below 5ºC or above 35ºC.
Before its application, the facing must be completely clean and dry. It should not be applied at temperatures below 5ºC or above 35ºC.
